840+900+800 three-layer color steel tile press machine
Technical parameters of 840+900+800 three-layer color steel tile press machine imitating resin tile:
I. Forming part
Number of forming rows: 11 rows for 840 type, 9 rows for 900 type, and 10 rows for 800 type.
Shaft diameter: Made of 45# steel and processed. The size is 70mm.
Roller material: Processed from 45# steel and hard chromium plated on the surface to improve wear resistance and service life.
Feed width: 1000mm.
II. Machine body part
Machine body structure: Welded with H-shaped steel of specific specifications, such as 300mm H-shaped steel. The middle plate is welded with steel plates of a certain thickness, usually 14mm steel plates, to ensure the stability and strength of the machine.
Middle plate connection: Connected by cast steel pull plates to ensure that the machine does not deform when pressing thick plates.
III. Transmission part
Transmission mode: Generally, chain wheel and chain transmission are adopted. The chain size is 1 inch.
Reducer: Equipped with a reducer of model 6# with a power of 3 kilowatts to make the machine run smoothly and without noise.
IV. Shearing part
Hydraulic system: Adopting CDF – 10 gear pump. The motor power is 4kW. It runs smoothly, without noise and has a long service life.
Shearing method: Adopting a thickened type of middle plate welding to ensure the accuracy and stability of shearing.
V. Control system
Control mode: The computer control system adopts a highly intelligent industrial electronic programmer PLC and frequency converter control system. The operation is simple, the accuracy is accurate, and the length accuracy is less than 2mm.
VI. Production speed
The panel output speed is generally 12 – 15 meters/minute.
VII. Equipment size and weight
Equipment size: The machine length is about 6 meters, the width is about 1.4 meters, and the height is about 1.6 meters.
Equipment weight: 840+900+800 three-layer color steel tile press machine weight is about 5 tons.
